6 Steps to the Perfect DIY Inground Pool
How to build a swimming pool on your own! Here you get the tips from the pros! The swimming pool builders gave the right tips for a wonderful DIY pool!
The process of building the swimming pool is not very simple, and each professional can follow a line, but in general, this method we separate is one of the most used. Among the numerous variations in the process some items can influence, such as a suspended pool or infinity pool, since both have somewhat different characteristics in the construction process.
The steps of building the swimming pool are:
The first step in the process of building a swimming pool is to decide what size and shape the pool will be. And at this point it is necessary to consider the space available on the ground, and to ponder reality with their expectations.
Second: the Depth: Another important detail that should be considered is the depth that the pool will have. To do this, consider whether or not children will use the pool, and also assess the terrain to see if the installation site does not pass pipes that can be damaged in the excavation process.
Third: the Excavation: The practical moment of the process of construction of the pool arrived. Now that you already have the dimensions and shapes of the pool, you have to dig the ground following the guidelines that determine the sizes. In this step, remember that the structure occupies a little space, so it is necessary to dig a little more the sides (about 15 to 20 cm more). To sustain the excavation, some wooden planks may aid the step.
Number four, Machine Digging is Faster Falling on the Floor: It is not enough just to follow a method of building a pool without considering very important details. And one of them is a small drop in the floor directed towards the drain, which makes the drainage of water easier.
Number five, Pipes: Before making the pool crate, make all necessary facilities and consider the holes required in the design; like outlet and water inlet. Structure with blocks: after digging the pool hole it is time to start the structure. In this step, make walls with structural blocks, as if they were walls, around the edge of the pool. In the middle of the blocks use hardware to ensure lift. One tip in this step is to make a double wall and the medium “stuffed” with brittle stones, ensuring a more reinforced structure for the pool.
Last but not least when building theswimming pool
The walls were made with structural block waterproofing, as the sixth tip: with the walls and floor already ready, it is time to waterproof this layer. To do this, use asphalt or waterproofing mortar, so as to avoid possible infiltration into the structure. Finishing: with the ducts already installed, walls ready and waterproofed, it is time to leave for the finishing of the swimming pool. Among the possibilities of coating, the tablets and ceramics are the most used. After this finished step, just clean the pool and fill! For more tips and 100% quality results contact swimming pool builders!